Introduction
We built this UV curing lamp for one simple reason: to bring serious glass-bonding power to small and medium-sized shops. No fuss, no over-the-top systems that cost a fortune. Just a lamp that does the job—fast and steady—without breaking the bank or taking over your workspace. You need a tool that feels industrial-grade but still fits your setup, your workflow, and your budget. That’s exactly what we set out to deliver.
The Power Behind the Process
Here’s the thing—this lamp is all about intensity. It runs on a 400V system, which packs a serious punch in a compact frame. That power lets you cure adhesives quickly, hitting the right temperature and UV levels without dragging out the process. The 300mm tube length is intentional too. It focuses the heat and UV right where you need it—on the bond line—without wasting energy. In real life, that means your line moves faster, and you get fewer rejects from adhesive that didn’t fully set. And the 2500W rating? Not some random number. It’s exactly what you need to hit the right irradiance on the bond, so the adhesive cures completely. Plus, it’s designed to drop right in where your current fixtures go, so you’re not rewiring half your machine.
What It’s Made Of
The tube uses a quartz envelope with a special coating. This keeps the UV output stable and helps manage the heat, so the lamp doesn’t get thrown off by sudden temperature swings. That means consistent performance, even on long runs. Inside, the halogen fill gives you predictable light output and a fast start-up. The lamp comes up to temperature quickly and stays steady, no matter how long the job takes. And the R7s connector? Practical choice. It locks in solid, handles the high current, and makes wiring straightforward. It’s a standard fit, so swapping out a lamp is simple—no redesign needed.
How It Handles Real-World Work
This lamp was built for the shop floor. It runs hot, so you do need to make sure your machine’s cooling is up to the task. Otherwise, heat builds up and can shorten the lamp’s life. But when the cooling is right, this thing just works. It gives you reliable curing for glass bonding, all in a compact footprint. The combo of 400V power, 2500W output, 300mm length, coated quartz, and the R7s connector adds up to a solution that’s tough, easy to maintain, and ready for daily use. If you need industrial-level performance without the industrial-level headache, this is it.