Getting the Most Out of Our 80W/cm Mercury UV Lamps
If you’re looking for speed—whether you’re curing resins or scrubbing a surface clean—the 80W/cm mercury lamp is the heavy hitter. It’s built for those who need high-intensity UV without messing around. The heat is the real story here. At this power level, these lamps get incredibly hot. To stop the glass from simply giving up and cracking under that pressure, we use high-purity quartz. It’s tough. But you still have to be careful with your power supply. If your ballast isn’t matched to the strike voltage needed to ignite the mercury vapor, you’re going to deal with flickering or, worse, a lamp that burns out way too soon. Making it your own If you’re buying these for your own line of machines, we can help you tweak the details. We don’t just ship a generic tube and call it a day. Need a specific length? Different end-caps? A different wattage per centimeter to fit a tight chassis? We can do that. You can even pick the wavelength—shortwave if you’re killing germs, or medium-wave for curing. We’ll even handle the branding and labels, so when the boxes hit your warehouse, they’re ready to go straight to your customers. A few things to keep in mind Here’s the honest truth: these aren’t “plug and play” components. Because they pump out so much energy, they run hot. Really hot. You’ll need high-temperature wiring and a cooling system—fans or water jackets—that can actually keep up. If you skimp on the cooling, the quartz envelope overheats. That messes with the light spectrum and kills the lamp’s lifespan. It’s a simple trade-off: you get massive UV power, but you have to manage the heat to keep things running smoothly.